PF30-24L Shallow insert for metal frames with internal wires.

PF30-24L-C

PF30-24L Shallow insert for metal frames with internal wires.
$189.99

Product Details

This bottom bracket is our PF30-24, but with a shallower insert depth. The original PF30-24 was designed to make a rock solid connection between the frame and crank set. Due to the almost 1 inch deep contact area with the frame, it covers the openings inside the BB shell on some frames. Typically the chain stay hole on steel and titanium frames. A real bummer if you're trying to route a Di2 wire internally. For these frames we have designed the PF30-24L, same thing minus the insert guide and a few mm of contact area.

This bottom bracket fits all 24mm crank spindles and comes with a GXP reducer in the box for Sram.

Choose road bearings for road bikes, cross bearings for mountain bikes and cyclocross.

Material Care

Ball bearings are wear items, similar to the chain on your bicycle. While we went out of our way to present you with the best possible product, your Kogel Bearings do require some maintenance and a new seal kit from time to time. Please download this service document from our manuals section for a step by step on how to keep your bearings running smoothly.

Warranty

Kogel Bearings strives for best-in-industry product support. Our hybrid and full ceramic bearings are covered under our 1+1 year warranty, which guarantees that we will keep you on the road for two years, pending on annual bearing service. Read more about our philosophy in this blog post.

Any Questions?

We always appreciate speaking to you. Our email address is info@kogel.cc or you can call us at +1 915-777-5666. We will get back to you within 24 hours.

Need help?
Need support?
Contact us if you have any questions about our products or your order.
Call us:
Chat on Facebook: