Ball bearings aren't usually top of mind for most cyclists, until you realize that they affect every single pedal stroke, wheel revolution, and derailleur shift.

Over the years, we’ve tested countless combinations of metals, ceramic materials, and sealing options to balance speed, load capacity, and durability. Today, we offer four distinct bearing options across our bottom brackets, wheel bearings, and Kolossos oversized derailleur cages.

Because each bearing type serves a specific purpose, understanding the trade-offs helps ensure you get the right setup for your riding style.

Kogel bearings with the seals removed, showing the balls and races

1. Kogel Ceramic (the original)

This is our classic hybrid ceramic configuration, in our lineup since the first day in 2013. It pairs smooth silicon nitride ceramic balls with high-hardness alloy steel races.

Standard high-carbon bearing steel provides exceptional surface hardness. Because ceramic balls are extremely hard and round, they require super hard races to avoid damage over time.

Gold Kogel bottom bracket cup with a freshly greased bearing

  • Trade-off: Alloy steel races deliver low rolling resistance under high load, but steel is inherently prone to oxidation. If you frequently ride in heavy rain or wash your bike with pressurized water, these races require regular cleaning and fresh grease to prevent surface corrosion.
  • Best Fit: Dry-weather road riding, crits, and riders who maintain a regular service schedule. Also good for riders who want the ceramic performance on a limited budget.

2. Kogel CR (corrosion resistant ceramic)

Kogel CR was developed to get the best of both worlds: low friction and corrosion resistance. A decade ago, stainless steel alloys were generally too soft to withstand the high contact pressure of ceramic balls without pitting.

Recent advancements in alloy heat treatment allowed us to introduce a super-hardened stainless steel race that matches the hardness required for ceramic balls while providing built-in corrosion protection.

Kogel CR corrosion resistant ceramic bottom brackets with blue seals

  • Trade-off: These bearings are the best available for bicycle applications, but they come at a higher price.
  • Best Fit: Gravel, cyclocross, mountain biking, and year-round commuting in wet climates.

3. Pulsar (full ceramic)

If you’ve seen a pulley wheel spin for 30 seconds in our ads, that’s the Pulsar.

Pulsar is a full ceramic bearing, meaning it contains no metal components. It utilizes Zirconium ceramic races and silicon nitride ceramic balls. Because there are no metals to oxidize or gall, Pulsar bearings require no grease or oil.

Pulsar full ceramic bearing, ceramic balls running in ceramic races

  • Trade-off: Ceramic materials are exceptionally hard but lack the impact resistance of steel. High shock loads can crack ceramic races, which is why Pulsar bearings are used exclusively in pulley wheels.
  • Best Fit: Road cycling, time trials and triathlons, focused purely on drivetrain efficiency.

4. Kogel ST (Stainless Steel Essentials)

The ST line uses the exact same super-hardened stainless steel races as our flagship CR bearings, but swaps the silicon nitride ceramic balls for high-grade stainless steel balls.

By using stainless balls instead of ceramic, we eliminate the highest-cost component of the bearing assembly while keeping the same corrosion-resistance found in our top-tier bearings.

Gold Kolossos ST oversized derailleur cage running Kogel ST stainless steel bearings

  • Trade-off: Stainless steel balls have slightly higher rolling friction than ceramic balls, but they offer high impact tolerance and total corrosion resistance at a lower price point.
  • Best Fit: High-mileage training, everyday riding, and riders looking for durable, weather-resistant pulley performance at a more affordable price.

Bearing Comparison Matrix

Bearing Type Ball Material Race Material Corrosion Resistance Lubrication Required? Primary Application
Kogel Ceramic Silicon Nitride Ceramic Alloy Tool Steel Moderate (Requires dry storage/care) Yes (Grease or Oil) Dry-road riding, pavement racing, classic hybrid setup
Kogel CR Silicon Nitride Ceramic Super-Hardened Stainless High (Rust-proof races) Yes (Grease or Oil) Gravel, CX, MTB, and all-weather road bottom brackets
Pulsar Silicon Nitride Ceramic Zirconium Ceramic Ultimate (No metal elements) No (Runs completely dry) Pulley wheels only; TT, Triathlon, and road use only
Kogel ST Stainless Steel Super-Hardened Stainless High (Rust-proof system) Yes (Grease or Oil) Everyday training, high-mileage riding, durable replacement

Washing mud off a gravel bike fitted with a Kolossos oversized derailleur cage

Summary

Different riding conditions demand different mechanical setups:

  1. For maximum efficiency on race day: Pulsar full ceramic pulleys.
  2. For ceramic performance in any conditions: Kogel CR.
  3. For maximum hardness and efficiency on dry roads: Kogel Ceramic.
  4. For long-term durability and weatherproofing without ceramic cost: Kogel ST.
— Ard Kessels